LOW-INDEX COATING FAMILY

Low Refractive Index Coatings for Optical Fiber

TIANZE manufactures TZ-136 and TZ-140 low refractive index coating materials for two distinct specialty-fiber application groups. Each can be paired with a protective outer coating and evaluated in the intended fiber process.

Start with the complete manufacturing requirement.

  • Fiber architecture and pump-light design
  • Target liquid and cured refractive index
  • Coating dimensions and draw conditions
  • Cure setup and finished-fiber evaluation

Low-index coating manufacturer support

The low-index platform combines application review, coating-process discussion and upstream polymer expertise for active, double-clad, medical and light-delivery fiber programs.

  • TZ-136 for selected active, doped and double-clad fiber structures
  • TZ-140 for selected medical, UV and laser-delivery fiber structures
  • Refractive-index comparisons defined by wavelength, temperature, material state and test method
See the company, laboratory and manufacturing base

Fiber Coating Application Brief

Define the fiber structure, coating layers, draw and cure process, optical conditions, environment and qualification plan.

Download coating brief (PDF)2-page printable engineering worksheet

Active and doped fiber

TZ-136 Low-Refractive-Index Active-Fiber Coating

TZ-136 · 3350

A low-refractive-index coating system for selected active, doped and double-clad fiber structures.

Evaluation focus

  • 1.36 liquid refractive index
  • Pump-light management
  • Draw and cure compatibility

Low-refractive-index primary coating

TZ-136

Viscosity @25°C
3,000 ± 500 mPa·s
Liquid refractive index @589 nm, 25°C
1.3600 ± 0.005
Cured refractive index (measurement conditions not listed)
1.372
Elongation at break
45%
Tg by DMA
86°C

Protective outer coating

3350

The website shows selected published data. Request the current full TDS for complete product information.

Sample availability, quantity, logistics and any charges are confirmed after technical and commercial review. A sample request does not imply a free sample.

Medical and light-delivery fiber

TZ-140 Low-Refractive-Index Medical-Fiber Coating

TZ-140 · 3360

A low-refractive-index coating system for medical, light-delivery and other specialty optical-fiber structures.

Evaluation focus

  • 1.40-class refractive index
  • Optical transmission design
  • Specialty-fiber protection

Low-refractive-index primary coating

TZ-140

Viscosity @25°C
3,500 ± 500 mPa·s
Liquid refractive index @589 nm, 25°C
1.3900 ± 0.005
Cured refractive index @589 nm
1.406 ± 0.003
Elastic modulus
278 MPa
Elongation at break
39–70%
Tg by DMA
71°C

Protective outer coating

3360

The website shows selected published data. Request the current full TDS for complete product information.

Sample availability, quantity, logistics and any charges are confirmed after technical and commercial review. A sample request does not imply a free sample.

Plan the application before comparing materials.

Questions for application planning

How should a refractive-index requirement be specified?

State the wavelength, temperature and whether the value refers to the liquid or cured material.

How do I choose between TZ-136 and TZ-140?

Begin with the fiber architecture and target refractive index. The two products address different application groups and should be evaluated in the intended fiber process.

Does the medical-fiber application description establish device certification?

No. It identifies an intended fiber application. Qualification of the finished device remains application-specific.

Request technical data